Oil changing steps of screw vacuum pump
Date: 2020-06-01 10:00 10:00, click: Author: screw vacuum pump.
Screw vacuum pump If we do not operate according to the standard when using, it is easy to appear some quality problems and affect its use effect. For better application, let's learn about it together. Screw vacuum pump What are the steps to change the oil?
The screw vacuum pump is disassembled, and the clean square tray is connected to the oil drain hole, and the oil stopper and the drain plug are screwed down to release the dirty oil. The air inlet is connected to the atmosphere after power failure. When the oil stops flowing, screw the oil drain plug. Discontinuous starting screw vacuum pump motor 4 to 6, so that the vacuum chamber of all oil discharged, and then from each gas pipe clean vacuum pump oil 200 to 300CC. Start the motor intermittently, clean the vacuum chamber again, repeat the cleaning for 2 to 3 times, shine the oil and turn on the drain plug. But at this time, when cleaning the screw vacuum pump, we should strictly prohibit the cleaning of kerosene, gasoline, alcohol and so on. Add clean vacuum pump oil from the oil filling plug to the center of the viewport, and tighten the oil stopper so as not to leak air. Replace the oil filter, replace the new oil and turn on the machine.
The above is about the screw vacuum pump oil change steps, when used in order to ensure the stability of the performance, we should operate according to the requirements in the use process, avoid unnecessary problems, hope that the above content will help you.