北京十一选五中奖金额

Capable, scientific and rigorous Welcome change, innovation, management and efficiency.

Unified hotline Eighteen billion nine hundred and fifty-four million four hundred and thirty-one thousand four hundred and thirty-three

PRODUCT CENTER
Product display
Contact us
Sales Hotline:
Contact Hotline
Eighteen billion nine hundred and fifty-four million four hundred and thirty-one thousand four hundred and thirty-three
Fax: 0533-5203927

Contacts: Manager Wang

Company address: No. 46, Bozhong Road, small industrial park, Ma Shang Town, Zibo
Common problem
Temperature drop of dry vacuum pump
Source: Http://hybchf.cn/ Date: 2020-05-28 10:35 10:35, click: Author: screw vacuum pump.
        Dry vacuum pump Has been widely used, such as in many industrial production process, will encounter many problems leading to the vacuum pump temperature rise, in order to better use, let's know. Dry vacuum pump What are the ways to cool down?
The air cooling of the screw vacuum pump is the air absorbed by the interstage or two-stage pump after being compressed and transmitted through a combined muffler with integrated absorption and phase difference. In order to make the dry vacuum pump work under a higher pressure difference, a more effective cooling method can be adopted. The rotor is cooled by circulating oil, and the oil holes and oil diameter shaft heads are respectively driven at the two ends of the pump shaft, and then discharged from the other end through the inner wall of the rotor. The oil film cooling method of the rotors is to connect an oil pipeline at the inlet of the dry vacuum pump, and to take the heat of the rotor with uniformly dripping cooling oil. Water cooling generates heat by transporting and compressing gas, which is transferred from the rotor to the shell. The gap between the rotor of the dry vacuum pump, the end face of the rotary plate and the end cover is too small. The friction heating causes the friction of the rotary disc to extend or overheat and too tight, and the hardness of the rotary disc is too large, and the burrs are mutually rolled together, resulting in deep scratches on the ends, resulting in clamping. When the shaft and axle sleeve are too tight, the lubricating oil passage will not be smooth, and the pump will be stuck due to sticking to each other.
The above is the cooling way of dry vacuum pump. I hope you all understand that if you must pay attention to the operation strictly according to the operation rules in the future, you can avoid unnecessary troubles and cause losses.

Zibo Dan ray Vacuum Equipment Co., Ltd.
Customer Service Hotline
Eighteen billion nine hundred and fifty-four million four hundred and thirty-one thousand four hundred and thirty-three
Contact us

Contact address: No. 46, Bozhong Road, small town Industrial Park, Ma Shang Town, Zibo

Company Tel: 18954431433

Contact: Manager Wang

Website map

Network promotion

Scan the mobile phone station.

Zibo Dan ray Vacuum Equipment Co., Ltd. all rights reserved.
Some pictures and contents of this site are from the Internet. Copyright is owned by the original author or the original company. If you think we infringe your copyright, please let us know! We will delete it immediately.

十一选五北京地走势图带连线 北京pk赛车10计划精准版 凤凰vip彩票提现不了 北京11选5网上投注 凤凰彩票怎样解绑银行卡 凤凰城棋牌真的吗 北京快3一定牛网 北京pk10彩票彩网 内蒙快三 冠通网络棋牌世界免费下载