Heating problem of screw vacuum pump
Date: 2020-05-25 11:00 11:00, click: Author: screw vacuum pump.
With the development of society, Screw vacuum pump It has also been recognized by everyone. The usage rate is very common. When screw vacuum pump is used, the temperature of the inner wall of the reducer within two hours after startup will be very high. Screw vacuum pump What is the problem of fever?
The screw vacuum pump is heating. If the temperature does not drop, please note that the oil windows on the screw vacuum pump can not be used together with the plexiglass plates. Lift the cryogenic cooler to the vacuum pump position of the screw vacuum pump and apply a cooling water of minus 10 degrees to lower the temperature. In order to reduce the working fluid temperature of the front pump of screw vacuum pump, measures should be taken to reduce the temperature, less than 20 degrees.
The above is a solution to the problem of the heating of screw vacuum pumps. Through the above introduction, we can see why the usage rate of vacuum pumps is so frequent now that we can pay attention to our website. We will regularly update the website articles to introduce the related problems of vacuum pumps, and we hope to help you.