Operation process of dry vacuum pump
Date: 2020-05-24 11:16 11:16, click: Author: screw vacuum pump.
Along with Dry vacuum pump The rapid development of the industry, in order to increase its service life, only purchase qualified Dry vacuum pump If we have the correct operation method, we can achieve good results. Let's know what the operation process of the dry vacuum pump is.
When the dry vacuum pump is in operation, it can be activated at the scene and central control. It is confirmed that it can be activated. The vacuum pump is started by the on-the-spot operation column start button, the outlet pipe drain valve is closed, the nitrogen sealing gas flow is checked or adjusted, the blowing valve is opened, the flow rate of the flowmeter is adjusted to normal, and after blowing for 5 to 10 minutes, the blowing valve is closed, the process inlet valve is opened, the system is cut into the system, and the vacuum pump is turned over. In the process, attention should be paid to observing the body temperature. The temperature can be controlled by adjusting the water quantity by the temperature regulating valve, and the temperature should be controlled as much as 50 to 75 degrees Celsius to ensure that the temperature is not more than 80 degrees.
When the dry vacuum pump is shut down, shut down the process inlet valve, cut out the system, open the purging valve, purge for 20 to 40 minutes, close the purging valve, stop the operation button through the field operation column, close the nitrogen valve and close the cooling water valve; if the winter is not used for a long time, it is necessary to drain the cooling water in the machine body and the pipeline to prevent frostbite, and open the outlet pipe drain valve and the inlet filter drain valve. Check if there is any condensate.
The above is about the operation process of dry vacuum pump. I hope you can understand that if you do not understand it, you can contact us. We can give you professional advice to avoid blind choice and cause unnecessary losses.