The problem of changing oil in screw vacuum pump
Date: 2020-05-22 12:11 12:11, click: Author: screw vacuum pump.
With the rapid development of China's economy and urban infrastructure, Screw vacuum pump Because of its many advantages, it has been applied to many fields. In order to better apply it, let's learn about it. Screw vacuum pump What are the oil changing methods?
After a period of time, the screw vacuum pump needs to change its oil. The oil change can make the machine run better, and at the same time, it can also ensure its service life. Screw the vacuum pump to remove the vacuum system, raise the chassis motor at one end, open the drain plug, drain the oil, rotate the vacuum pump, cover the exhaust port, release all the waste oil from the oil outlet, and add new oil from the inlet. Continuous rotation, internal cleaning, according to this operation, after the special waste oil is released, then install the drain plug, put the pump flat, add new oil from the intake port and fuel hole respectively, and replace the oil. When the screw vacuum pump is replaced with oil, it is not suitable to start the motor for a long time, so as not to cause the exhaust valve to jump too violently and fatigue. It is strictly forbidden to clean the screw vacuum pump with kerosene, gasoline and alcohol. Screw vacuum pump oil change should be carried out after the oil temperature rises, and the appropriate temperature can change the oil better. Only by coordinating each part can we solve the problem better.
The above is about the screw vacuum pump oil change method, we can understand that in the future use of the process must be strictly in accordance with the provisions of the operation to achieve the desired results, if you do not understand, you can call to consult, I hope the above content will help the big family.